| 产品特性：卫生 | 品牌：美国RETZ瑞茨 | 型号：进口卫生级高性能离心泵 |
| 材质：不锈钢 | 性能：卫生 | 用途： 维护产品的质量和安全性 |
| 扬程：70m | 驱动方式：电动 | 输送介质：清水泵 |
| 叶轮结构：敞开式叶轮 | 叶轮吸入方式：双吸式 | 流量：120m3/h |
RETZ/我们一直致力于流体控制领域的持续创新，始于2005……进口卫生级高性能离心泵是一款全不锈钢设计的离心泵，包含电机也是不锈钢，它不仅优化了内部结构、叶轮设计、死角处理、机封压力平衡设计且机封完全被处在冲洗区域。我们还对泵外部卫生也进行了优化，使其内部洁净卫生、外部减少死角，由于没有死角区域，它非常容易被CIP清洗、SIP杀菌等。另外我们对泵保持了最灵活性组合应用，如，泵出口角度可以从 0°-360°之间任意调整，泵盖采用卡箍式连接，这样对泵维护和保养及机封的更换，保持了高效，降低了人员高度专业性的要求，而这些无需特殊的工具。因完成而达到了、高效、卫生、高可靠性及低成本的目的retz The imported sanitary grade high-performance centrifugal pump is a centrifugal pump designed entirely of stainless steel, including the motor which is also stainless steel. It not only optimizes the internal structure, impeller design, dead angle treatment, mechanical seal pressure balance design, but also the mechanical seal is completely in the flushing area. We have also optimized the external hygiene of the pump to ensure absolute internal hygiene and reduce dead spots on the outside. As there are no dead spots, it is very easy to be cleaned by CIP, sterilized by SIP, etc. In addition, we have maintained maximum flexibility in the combination of pump applications, such as the pump outlet angle being adjustable from 0 ° to 360 °, and the pump cover being connected with clamps. This ensures efficient pump maintenance and replacement of mechanical seals, reducing the need for highly specialized personnel without the need for special tools. Achieved the goals of high efficiency, hygiene, high reliability, and low cost due to completion
泵进出口的接连方式
液体在管道中会有能量的损失，分为沿程损失和局部阻力损失,管内越光滑,沿程损失越小,弯道越少，管径变化越小，局部阻力损失越小,因而尽量不要采用粗糙的管道连接，也不要在连接中用管道急变的方式连接
进口卫生级高性能离心泵进口卫生级高性能离心泵
流量范围flow ：1m?/h-120m?/h
扬程范围 lift：70 M
温度范围 Temperature : -20到140℃
材质 material quality：SUS304,SUS316L(在材料的选用上泵体，泵盖，叶轮等凡与物料接触之零件由SUS316L或SUS304不锈钢制造)
表面处理 Surface Treatment：≤ Ra0.8μm，≤ Ra0.6μm，≤ Ra0.4μm
机封 : 单机封、双机封 Machine seal: single machine seal, double machine seal
进/出口连接 ： 螺纹、卡箍、法兰、无菌法兰 Inlet/outlet connections: threads, clamps, flanges, sterile flanges
