| 产品特性：碳钢 | 品牌：RETZ瑞茨 | 型号：进口短体法兰蝶阀 |
| 结构形式：垂直板式 | 3C阀门类别：工业 | 加工定制：是 |
| 材质：碳钢 | 连接形式：法兰 | 适用介质：水 |
| 压力环境：16bar | 工作温度：-20℃ to +100℃ | 标准：美标 |
| 流动方向：双向 | 驱动方式：手动 | 零部件及配件：阀体 |
| 用途：流量控制 | 类型(通道位置)：直通式 | 公称通径：DN50-DN1200 |
| 规格：DN50-DN1200 |
品牌：RETZ瑞茨/美国，我们一直致力于流体控制领域的持续创新，始于2005……
性能：往复回转90°旋转开启、关闭或调节介质流量的一种阀门
Performance: A valve that rotates 90 ° back and forth to open, close, or regulate medium flow rate
产品详情 Product details
短长度法兰蝶阀采用中线型设计，具有安装、维修方便等特点。可广泛应用于给排水，暖通系统等流体管线上作为调节或截流装置使用
The short length flange butterfly valve adopts a medium line design, which has the characteristics of easy installation and maintenance. It can be widely used as a regulating or intercepting device in fluid pipelines such as water supply and drainage, HVAC systems, etc
短长度法兰蝶阀，短体法兰蝶阀是用圆盘式启闭件往复回转90°左右来开启、关闭或调节介质流量的一种阀门，阀板与阀轴的高精度加工确保了持久***负载传输
Imported short length flange butterfly valve, short body flange butterfly valve is a type of valve that uses a disc type opening and closing element to rotate back and forth by about 90 ° to open, close, or adjust the medium flow rate. The high-precision processing of the valve plate and valve shaft ensures long-lasting and effective load transmission
进口短体法兰蝶阀特点
蝶阀具有调节及密封性能好、阻力小、启闭迅速
尺寸紧凑、重量轻，占有空间小的优势，取代传统的闸阀和截止阀，
不可忽视的蝶阀安装要点Main points of installation butterfly valve
1、要求使用对焊法兰，不建议采用平焊法兰，因为钢管伸进平焊法兰，容易碰到阀板，影响阀板自由启闭Recommend to use butt welding flange. Do not use flat welding flange because steel pipe can easily meet disc to affect opening and closing freely disc if steel pipe enter flat welding flange.
2、确认法兰尺寸必须允许阀板自由转动，法兰内径不能过小或过大 The inner diameter of flange can&＃39;t be too small or too big and must confirm the dimension of flange so that the disc can turn free.
3、蝶阀装上后不允许再焊接法兰，以免***衬圈 For avoiding scalding the seat, do not weld flange after the butterfly valve was installed in pipe.
进口短体法兰蝶阀技术规范 Technical specifications
公称通径：DN50-DN1200
结构长度：GB/T12221、EN 558 Series 20、 *** 5752 Series 20 、API 609 Table 1
连接法兰：GB/T9113PN10/16、DIN 2501 PN10/16 、ASME Class 150、 AWWA C 207 、AS 2129 Talbe D and E 、JIS B2238 10K
密封等级：GB/T13927、EN 12266 (Leakage rate A)、API 598(Table 5)、*** 5208, Category 3
工作温度：-20℃ to +100℃（取决于压力、介质和材料）
工作压力：16bar
阀体、阀盖：铸铁、碳钢、不锈钢
阀座：青铜、不锈钢
阀杆：铬不锈钢
阀座：橡胶
