裕原流体控制(上海)有限公司
  • 资质核验已核验企业营业执照
  • 真实性核验借助银行进行对公账号验证或进行法人人脸识别核验企业真实身份
  • 所 在 地:上海 上海 金山区
  • 主营产品: 进口阀门 进口流量计 进口变送器 进口联轴器
3年
  • 资质核验已核验企业营业执照
  • 真实性核验借助银行进行对公账号验证或进行法人人脸识别核验企业真实身份
当前位置:
首页>
供应产品>
进口中压电磁阀 常闭 常开 不锈钢中高压电磁阀 RETZ瑞茨品牌
微信联系
扫一扫
添加商家微信
联系方式 在线联系

进口中压电磁阀 常闭 常开 不锈钢中高压电磁阀 RETZ瑞茨品牌

进口中压电磁阀通常为活塞式结构,广泛应用于吹瓶机械、空压机、加湿设备、高温高压场合、中高温热水、导热油、高温蒸汽、饱和蒸汽及过热蒸汽等需要高压控制的系统中

价    格

订货量

  • 面议 价格为商家提供的参考价,请通过"获取最低报价"
    获得您最满意的心理价位~

    不限

林先生
邮箱已验证
手机已验证
𐁩𐁪𐁫 𐁬𐁩𐁬𐁩 𐁭𐁩𐁮𐁮 𐁯𐁭𐁩𐁰𐁪𐁩𐁭𐁫𐁱𐁫𐁫𐁱
微信在线
  • 发货地:上海 金山区
  • 发货期限:7天内发货
  • 供货总量: 10000个
裕原流体控制(上海)有限公司 VIP会员 第3
  • 资质核验已核验企业营业执照
  • 真实性核验借助银行进行对公账号验证或进行法人人脸识别核验企业真实身份
  • 林先生
    邮箱已验证
    手机已验证
  • 𐁩𐁪𐁫 𐁬𐁩𐁬𐁩 𐁭𐁩𐁮𐁮
  • 微信交谈
    扫一扫 微信联系
  • 上海 上海
  • 进口阀门,进口流量计,进口变送器,进口联轴器

联系方式

  • 联系人:
    林先生
  • 职   位:
    经理
  • 电   话:
    𐁯𐁭𐁩𐁰𐁪𐁩𐁭𐁫𐁱𐁫𐁫𐁱
  • 手   机:
    𐁩𐁪𐁫𐁬𐁩𐁬𐁩𐁭𐁩𐁮𐁮
  • 地   址:
    上海 上海 金山区 上海市金山工业区亭卫公路6495弄168号5幢(时兴园区)
产品特性:不锈钢品牌:RETZ美国瑞茨型号:进口中压电磁阀
材质:不锈钢类型(通道位置):先导式连接形式:法兰
3C阀门类别:工业适用介质:蒸汽流动方向:双向
用途:调压公称通径:见说明mm工作温度:-200~+350℃
位置数:6使用压力:0.5-200mpa有效截面积:21mm?
动作方式:电磁最高动作频率:见说明规格:1/2-8
规格1:15-150



品牌:RETZ瑞茨/我们一直致力于流体控制领域的持续创新,始于2005……进口中压电磁阀通常为活塞式结构,广泛应用于吹瓶机械、空压机、加湿设备、高温高压场合、中高温热水、导热油、高温蒸汽、饱和蒸汽及过热蒸汽等需要高压控制的系统中The Retz low and medium pressure solenoid valve is usually a piston type structure and is widely used in high-pressure control systems such as bottle blowing machinery, air compressors, humidification equipment, high-temperature and high-pressure occasions, medium and high temperature hot water, thermal oil, high-temperature steam, saturated steam, and superheated steam that require high-pressure control

进口中压电磁阀工作原理 working principle

当线圈(1)通电,动铁芯(2)吸合,先导阀口(3)处于开启状态,使主阀塞(4)上腔降压,主阀塞(4)因压差开启,介质流通When the coil (1) is energized, the moving iron core (2) is closed, and the pilot valve port (3) is in an open state, causing the upper chamber of the main valve plug (4) to decrease pressure. The main valve plug (4) opens due to the pressure difference, and the medium flows through

当线圈(1)断电,动铁芯(2)靠弹簧复位,先导阀口(3)处于关闭状态,使主阀塞(4)上腔升压,将主阀塞(4)压下,电磁阀关闭 When the coil (1) is powered off, the moving iron core (2) is reset by the spring, and the pilot valve port (3) is in a closed state, causing the upper chamber of the main valve plug (4) to increase pressure. The main valve plug (4) is pressed down, and the solenoid valve is closed

此种高压式结构电磁阀主要使用在高压流体,它需要一定压力才能正常工作This high-pressure structure solenoid valve is mainly used in high-pressure fluids and requires a certain amount of pressure to function properly


进口中压电磁阀产品特点 Product Features

先导式结构,阀芯均为不锈钢活塞,活塞环不会被介质中的杂质卡死,动密封性能高,寿命长 Pilot structure, valve core is made of stainless steel piston, piston ring will not be stuck by impurities in the medium, with high dynamic sealing performance and long service life

活塞与金属阀腔不产生直接摩擦,阀体安装方向***制 There is no direct friction between the piston and the metal valve chamber, and the installation direction of the valve body is unrestricted

线圈不易烧毁,长时间停止动作重新启动,动作同样灵敏 The coil is not easy to burn out, and if it stops for a long time and restarts, the action is equally sensitive

泄漏量零,使用寿命长达100万次以上 Zero leakage, with a service life of over 1 million times


进口中压电磁阀技术参数进

规格:1/2-8"  Specification: 1/2-8“

阀体材质:不锈钢 Valve body material: stainless steel

介质温度:-200~+350℃ Medium temperature: -200~+350 ℃

压力等级:0.5-200bar Pressure rating: 0.5-200bar

介质粘度:小于50C St(大于时需定制)Medium viscosity: less than 50C St (customized if greater than)

防护性能:防水、防爆(Exd IICT5)、防腐 Protective performance: waterproof, explosion-proof (Exd IICT5), anti-corrosion

接线方式:接线座式;引线式;插头式 Wiring method: wiring base type; Lead type; Plug type

控制方式:常开、常闭 Control mode: normally open, normally closed

电源电压:DC24~127V;AC36~380V Power supply voltage: DC24~127V; AC36~380V

连接方式:螺纹、法兰(外螺纹和特殊接口可定做或加转接头)Connection method: thread, flange (external thread and special interface can be customized or equipped with adapter)

适用介质:水、气、油、蒸汽、燃气、腐蚀流体等 Applicable media: water, gas, oil, steam, gas, corrosive fluids, etc


免责声明:
本页面所展现的公司信息、产品信息及其他相关信息,均来源于其对应的商铺,信息的真实性、准确性和合法性由该信息来源商铺的所属发布者完全负责,供应商网对此不承担任何保证责任。
友情提醒:
建议您在购买相关产品前务必确认供应商资质及产品质量,过低的价格有可能是虚假信息,请谨慎对待,谨防欺诈行为。
 
建议您在搜索产品时,优先选择带有标识的会员,该为供应商网VIP会员标识,信誉度更高。

版权所有 供应商网(www.gys.cn)

京ICP备2023035610号-2

裕原流体控制(上海)有限公司 手机:𐁩𐁪𐁫𐁬𐁩𐁬𐁩𐁭𐁩𐁮𐁮 电话:𐁯𐁭𐁩𐁰𐁪𐁩𐁭𐁫𐁱𐁫𐁫𐁱 地址:上海 上海 金山区 上海市金山工业区亭卫公路6495弄168号5幢(时兴园区)