| 产品特性：防腐蚀 | 品牌：RETZ美国瑞茨 | 型号：进口PTFE电磁阀 |
| 材质：PTFE | 类型(通道位置)：先导 | 连接形式：螺纹 |
| 3C阀门类别：工业 | 适用介质：各种高腐蚀化学介质 | 流动方向：双向 |
| 用途：温控 | 公称通径：见说明mm | 工作温度：-0℃ ~+120℃ |
| 位置数：6 | 使用压力：0.01MPa~0.6mpa | 有效截面积：见说明mm? |
| 动作方式：见说明 | 最高动作频率：见说明 | 规格：3/8-3 |
品牌：RETZ瑞茨/我们一直致力于流体控制领域的持续创新，始于2005……进口防腐蚀电磁阀采用聚四氟乙烯/PTFE为原材料,几乎适用于各种化学、酸碱、盐酸、硝酸、醋酸等腐蚀性介质管道作自动化控制The Retz anti-corrosion solenoid valve uses polytetrafluoroethylene/PTFE as the raw material, and is almost suitable for automatic control of various corrosive media pipelines such as chemical, acid-base, hydrochloric acid, nitric acid, acetic acid, etc
进口PTFE电磁阀工作原理--Working principle of imported PTFE solenoid valve
常闭式：当线圈通电时，先导阀芯吸合，先导孔打开，阀上腔卸压，活塞靠下腔介质压力推动，电磁阀打开。当线圈断电时，先导阀芯靠弹簧复位，先导孔关闭，阀上腔由活塞节流孔增压和复位弹簧的推力，电磁阀关闭。Normally closed: When the coil is energized, the pilot valve core is closed, the pilot hole opens, the upper chamber of the valve is depressurized, the piston is pushed by the medium pressure in the lower chamber, and the solenoid valve opens. When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is closed, and the valve upper chamber is pressurized by the piston orifice and the thrust of the reset spring, and the solenoid valve is closed.
常开式：当线圈通电时，先导阀芯靠弹簧复位，先导孔关闭，阀上腔由活塞节流孔增压和复位弹簧的推力，电磁阀关闭。当线圈断电时，先导阀芯靠弹簧复位，先导孔打开，阀上腔卸压，活塞靠下腔介质压力推动，电磁阀打开。Normally open: When the coil is energized, the pilot valve core is reset by the spring, the pilot hole is closed, and the upper chamber of the valve is pressurized by the piston orifice and the thrust of the reset spring, and the solenoid valve is closed. When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is opened, the upper chamber of the valve is depressurized, the piston is pushed by the medium pressure in the lower chamber, and the solenoid valve opens.
进口PTFE电磁阀结构特点--
零压启动,动作响应迅速;
线圈动作可靠性并能防水、防潮;
专制线圈，不易烧毁；
适应在爆炸危险场所使用;
进口化工专用电磁阀规格尺寸--
产品规格：3/8-3"
阀体材质：不锈钢 、聚四氟乙烯、聚氯乙烯
介质温度： -0℃ ~+120 ℃
适用压力：0.01MPa~0.6MPa
防护性能：防水、防爆（DⅡCT5、ExdⅡCT5、ExmbⅡCT4、ExdⅡCT4）、防腐。
防护等级：IP67、IP65
阀芯材质: 均为不锈钢
接线方式：接线座式、引线式、插头式
控制方式：常开、常闭
电源电压：DC24~127V；AC36~380V
连接方式：内螺纹、法兰
适用介质：小于50CSt （大于50时需定制），腐蚀性液体、气体
泄 漏 量： 零
